梦之城注册登录

Retoflex(熱得福)高溫蒸煮膜系列

Retoflex(熱得福)高溫蒸煮膜

Retoflex(熱得福)高溫蒸煮膜

產品描述

Product Description

本品為耐高溫薄膜材料復合加工而成的復合高溫蒸煮膜、袋。

This product is a composite high temperature cooking film and bag, which is made of high temperature film material.

產品特點

Product

Features

1、 不含塑化劑,低溶劑殘留、無異味,安全衛生;

No plasticizer, low solvent residue, no odor, safe and hygienic.

2、 適合抽真空,材質柔軟,強度高,熱封性好;

Suitable for vacuum pumping, soft material, high strength and good heat sealing.

3、 采用耐高溫蒸煮材料復合,可耐高溫蒸煮;

The material is made of high temperature resistant cooking material and can be cooked at high temperature.

4、 抗穿刺強度高;

High puncture resistance.

5、 氧氣阻隔性強,保香性好;

The oxygen barrier is strong and the fragrance is good.

6、 適用熱成型自動包裝設備,抽真空包裝后包裝袋表面貼體、平整。

It is suitable for hot forming automatic packaging equipment. After vacuum packaging, the surface of the packaging bags is fitted and smoothed.

 技術指標

Technical 

Indexes

1、 適合100℃~135℃高溫蒸煮殺菌使用。

It is suitable for cooking and sterilizing at 100 to 135 degrees.

2、 剝離強度≥2.5N/15mm、熱封強度≥50N/15mm。

The peel strength is more than 2.5N/15mm, and the heat sealing strength is more than 50N/15mm.

其他功能性指標可由供需雙方共同商定。

Other functional indicators can be agreed by the supplier and the buyer.

典型結構有,NY/NY/RCPP、PET/AL/NY/RCPP、NY/RCPP、NY/AL/RCPP。

Typical structures are NY/NY/RCPP, PET/AL/NY/RCPP, NY/RCPP and NY/AL/RCPP.

使用方法

Usage Method

常壓或抽真空狀態下填裝、熱封,在大型殺菌鍋或自動殺菌釜中做高溫蒸煮殺菌使用。

Filling and heat sealing under normal pressure or vacuum, cooking and sterilizing at high temperature in large sterilizing pot or autoclave.

è 用途Purpose

主要用于粽子、肉類熟食、醬料等食品包裝。Mainly used for dumplings, meat cooked food, sauce and other food packaging.

è 注意事項

Matters Needing Attention

裝車時應小心輕放、防止機械碰撞。中途停車時,不允許停在烈日下,防止暴曬,應停在陰涼處,卸貨時也應在陰涼處,以免造成產品老化;

When loading the car, be careful to light and prevent the mechanical collision. When stopping in the middle of the road, it is not allowed to stop in the sun and prevent insolation. It should be stopped in the cool place and the unloading should be in the cool place, so as to avoid the shrinkage and deformation of the products.

●貯存條件應放置在溫度不超過35℃在整潔、干燥通風、陰涼的庫房內,妥善堆放,距離熱源大于2m,不能受強光直射;

This product should be placed at storage conditions, which temperature is not more than 35 degrees. In a clean, dry, ventilated and cool storehouse, it should be stacked properly. The distance from the heat source is greater than 2m.

●使用時應現取現用,不得長時間放置在高溫車間內。

When used, it should be used now and should not be placed in a high temperature workshop for a long time.

亚洲城唯一线上娱乐-官网 体育投注平台-官网 亚洲城娱乐官方网站 亚洲城唯一线上娱乐-官网 梦之城注册登录-官网 沙龙国际sa36亚洲第一品牌-官网 {@sdcms:page table="View_info" where="classid in({sdcms:class_allclassid}) and ispass=1" order="Ontop desc,id desc"} {@eof} {/@eof} {/@sdcms:page}